Modification of the fracture criterion for V-shaped notches (plane problem). Relationship between toughness and strength and structural parameters

A fracture criterion of the type of the Neuber-Novozhilov criterion is proposed to describe the fracture in the vicinity of the tip of a V-shaped notch under tensile and shear loading. In the proposed criterion, the limits of averaging of the stresses along the notch axis depend on the presence, location, and size of the initial defects in the material. The crystal lattice parameter of the initial material is chosen for the characteristic linear size. For a V-shaped notch subjected to tension and shear, simple equations are obtained that relate the stress intensity factors for the modified singularity coefficients, the singularity coefficients themselves, and the theoretical tensile and shear strengths of a single crystal of the material taking into account the damage to the material in the vicinity of the notch tip. The equations obtained allow a passage to the limit from a notch to a crack. It is shown that the classical critical stress intensity factor used in the strength analysis of cracked solids is not a material constant.Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 1, pp. 106–115, January–February, 2005.     

A criterion for the onset of growth of two shear cracks in an elastic body under plane-strain conditions

The Wiener-Hopf method is used to find a solution to a symmetric problem that gives a criterion for the onset of growth of long shear cracks emanating from a corner point on the boundary of a hole and filled with a plastic material __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 4, pp. 83–90, April 2006.     

Stress concentration around a spheroidal crack caused by a harmonic wave incident at an arbitrary angle

A method is proposed to study the stress concentration around a shallow spheroidal crack in an infinite elastic body. The stress concentration is due to the diffraction of a low-frequency plane longitudinal wave by the crack. The direction of wave propagation is established in which the combined concentration of mode I and mode II stresses is maximum __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 1, pp. 70–77, January 2006.     

ANALYSIS ON ACOUSTICAL SCATTERING BY A CRACKED ELASTIC STRUCTURE

The acoustical scattering by a cracked elastic structure is studied. The mixed method of boundary element and fractal finite element is adopted to solve the cracked structure-acoustic coupling problem. The fractal two-level finite element method is employed for the cracked structure, which can reduce the degree of freedoms (DOFs) greatly, and the boundary element method is used for the exterior acoustic field which can automatically satisfy Sommerfeld‘s radiation condition. Numerical examples show that the resonance frequency is lower with the crack‘s depth increase, and that the effect on the acoustical field by the crack is particularly pronounced in the vicinity of the crack tip. This mixed method of boundary element and finite element is effective in solving the scattering problem by a cracked structure.     

不确定非线性结构动力响应的区间分析方法

研究多自由度非线性不确定参数系统的动力响应问题. 以区间数学为基础，将不确定 性参数用区间进行定量化，借助一阶Taylor级数，给出了近似估计非线性振动系统动力响 应范围的区间分析方法. 从数学证明和数值算例两方面，将其与概率摄动有限元法进行了比 较，结果显示区间分析方法对不确定参数先验信息具有要求较少、精度较高的优点.     

模糊桁架结构在模糊激励下的动力响应分析

研究了模糊参数桁架结构在模糊荷载激励下的动力响应分析问题. 不仅模糊桁架结构的物 理参数、几何尺寸具有模糊性，而且外载荷幅值也具有模糊性时，从Duhamel积分式出发，利用模糊因子法、区间运算和振型叠加法求出了结构动力响应模糊变量的表达式. 最后通过算例考察了结构参数和作用荷载的模糊性对结构动力响应的影响，表明所提出的计算模型和 分析方法是正确与可行的.     

Ⅱ-Ⅲ混合型裂纹相变增韧分析

本文采用压力敏感准则和松函数法对相变增韧陶瓷Ⅱ-Ⅲ混合型裂纹的增韧效应进行了理论预测。分别给出了静止裂纹和定常扩展裂纹相变塑性屏蔽的理论表达式。结果表明：相变对静止裂纹有甚微的负屏蔽效应，并随KⅢ/KⅡ的比值而波动；相变对定常扩展裂纹的增韧结果除与材料弹性模量、相变尾区高度和相变体积分数有关外，还与KⅢ/KⅡ的比值有关。     

Variation of the stress intensity factor along the front of a 3-D rectangular crack subjected to mixed-mode load

Summary  The singular integral equation method is applied to the calculation of the stress intensity factor at the front of a rectangular crack subjected to mixed-mode load. The stress field induced by a body force doublet is used as a fundamental solution. The problem is formulated as a system of integral equations with r ⁻³-singularities. In solving the integral equations, unknown functions of body-force densities are approximated by the product of polynomial and fundamental densities. The fundamental densities are chosen to express two-dimensional cracks in an infinite body for the limiting cases of the aspect ratio of the rectangle. The present method yields rapidly converging numerical results and satisfies boundary conditions all over the crack boundary. A smooth distribution of the stress intensity factor along the crack front is presented for various crack shapes and different Poisson's ratio. Received 5 March 2002; accepted for publication 2 July 2002     

ELECTROELASTIC FIELD FOR AN IMPERMEABLE ANTI-PLANE SHEAR CRACK IN A PIEZOELECTRIC CERAMICS PLATE

ＩｎｔｒｏｄｕｃｔｉｏｎＤｕｅｔｏｔｈｅｉｎｔｒｉｎｓｉｃｃｏｕｐｌｉｎｇｃｈａｒａｃｔｅｒｉｓｔｉｃｓｂｅｔｗｅｅｎｅｌｅｃｔｒｉｃａｎｄｅｌａｓｔｉｃｂｅｈａｖｉｏｒｓ,ｔｈａｔｉｓ,ａｐｐｌｉｅｄｍｅｃｈａｎｉｃａｌｌｏａｄｉｎｇｐｒｏｄｕｃｅｓｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ａｓｗｅｌｌａｓｅｌｅｃｔｒｉｃｆｉｅｌｄ ,ａｎｄｃｏｎｖｅｒｓｅｌｙｅｌｅｃｔｒｉｃｆｉｅｌｄｃａｎｇｉｖｅｒｉｓｅｔｏｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ｐｉｅｚｏｅｌｅｃｔｒｉｃｍａｔｅｒｉａｌｓｈａｖｅ…     

陶瓷阻力曲线测定的新方法——断裂栅法

将零厚度单向试件栅刻蚀工艺应用于晶须增韧氮化硅陶瓷基复合材料表面，通过记录试件所在桥路的输出电压值，可得到随载荷不断增大裂纹逐渐向前扩展过程中每一时刻的裂尖位置和裂纹长度，从而得到该种材料的阻力曲线。